product_sseries_banner_small

G-3120 35KW Wind Turbine

Green Energy that works

The Endurance G-3120 35KW Wind Turbine is designed for larger farms, irrigation pivots, schools, hospitals, manufacturing and fabrication companies and any other applications requiring 100,000 – 200,000 kWh per year of electricity.*

Register for More Information

Cornerstones of Endurance Design

  • Production Efficiency

    • Most distributed wind customers did not select their site for wind resources, but look to generate power from the wind available to them. Endurance wind turbines are designed specifically for less-than-perfect wind conditions.
      • Swept Area
        The blades capture the energy of the wind. The larger the rotor diameter, the more wind energy the turbine captures. The Endurance G-3120 has a 19m (63 ft) rotor diameter- one of the largest rotor diameters per rated kW in its class- to capture the most wind energy.
      • Motoring
        Motoring starts the blades spinning so the turbine operates in lighter wind conditions than if it relied solely on the wind to start (3-phase models only).
      • Generator Type
        The induction generator produces electricity that can be transferred to the power grid without inverters. This provides lower equipment and maintenance costs and increases overall power production.
  • Reliability

    • All Endurance turbines have been extensively tested to ensure customers receive dependable energy production. They are built with proven commercial components for durability and easy support in the future.
      • Five Year Warranty
        Endurance offers one of the best warranties in the wind industry, covering all defective components and labor for five years.
  • Safe Operation

    • When the turbine control system detects any fault, such as high wind or a grid power loss, the dual caliper disc brake system activates, safely stopping the turbine until the condition is cleared.
      • Passive Stall Rotor Design
        The fixed-speed rotor aerodynamically stalls the blades as the first layer of protection for the turbine during high winds.
      • Control and Remote Interface Software
        Each Endurance wind turbine is operated safely by an onboard computer system with advance control logic. This system also records data including energy production, average power, wind speed and event history. Turbine controls and data are also remotely available from a web browser.
  • Quiet Operation

    • Quiet operation is essential for a wind turbine in a community environment. Endurance turbines use slowly turning blades and high-quality manufactured components to make them the quietest turbines in their class.
  • Clean Aesthetics

    • A wind turbine makes a powerful statement about your commitment to the environment and clean energy. Endurance wind turbines have clean lines and make an attractive addition to any landscape.

Specifications
Turbine
Configuration 3 blades, horizontal axis, downwind
Rated power @ 11 m/s 35 kW
Applications Direct Grid-Tie
Rotor speed 42 rpm
Cut-in wind speed 3.5 m/s (7.8 mph)
Cut-out wind speed 25 m/s (56 mph)
Survival wind speed 52 m/s (116 mph)
Overall weight 3990 kg (8800 lbs)
Rotor
Rotor diameter 19.2m (63 ft)
Swept area 290m² (3120 ft²)
Blade length 9.00m (29.5 ft)
Blade material Fiberglass / Epoxy
Power regulation Resistive dump loads provided – custom configurations available
Generator
Type Induction Generator
Configurations 3Φ, 480 VAC or 600 VAC @ 60 Hz
3Φ, 400 VAC @ 50 Hz
Single phase available, please enquire
Brake & Safety Systems
Main brake system Rapid fail-safe dual mechanical brakes
Secondary safety Pitch control system (for over-speed regulation)
using passive spring-loaded mechanism (patent pending)
Automatic shut down triggered by : - High wind speed
- Grid failure
- Over-speed
- All other fault conditions
Controls
Control System Programmable logic controller (PLC)
User interface Wireless or wired networked software interface for remote monitoring and control
Warranty
Turbine & controls 5 years
Towers
Types Free-standing monopole: 30.5 m (100 ft),
36.5 m (120 ft), 42.7 m (140 ft)
Free-standing lattice: 30.5 m (100 ft),
36.5 m (120 ft), 42.7 m (140 ft)
Maintenance Access Safe climbing system
Working space inside the nacelle
Tower-top work platform

* G-3120 is available in North America only

Contact our Sales Department